Moulding Separating Oil Release Agent Eloi Betonus Eac 1000l Ibc

Applications

BETONUS EAC This mould oil is recommended for steel and coated wooden moulds and should be

applied, by spraying, swabbing or brushing, as a thin layer.

For coated wooden moulds: use 1 litre of this mould oil at 30-40 m²

For steel moulds: use 1 litre of this mould oil at 40-50 m².

After applying the overspill must be removed, otherwise it tends to give oil marks on the concrete when to

much is used. This mould oil can also be used for the manufacturing of concrete in warm moulds.

Typical characteristics

Test Unit Average result

Density at 15°C kg / m³ 835

Viscosity at 40°C cSt 6,03

Pour point °C -27

Flash point COC °C 93

Distillation to 350°C Mg KOH/g 3,3